| 昝孟晴,黄韩韩,张广超,马玲云,许鸣镝,牛剑钊,刘倩.采用高分辨显微成像技术从药物制剂结构角度分析盐酸特拉唑嗪片溶出度测定结果[J].中国药事,2023,(2):187-191 |
| 采用高分辨显微成像技术从药物制剂结构角度分析盐酸特拉唑嗪片溶出度测定结果 |
| Analysis of the Dissolution Test Results of Terazosin Hydrochloride Tablets from the Perspective of Pharmaceutical Preparation Structure by High-resolution Microscopic Imaging Technology |
| |
| DOI：10.16153/j.1002-7777.2023.02.009 |
| 中文关键词: 溶出度 孔隙率 桨法 异形溶出杯 高分辨率显微CT技术 |
| 英文关键词: dissolution porosity paddle method special-shaped dissolution vessel high-resolution micro-CT technology |
| 基金项目:国家重点研发计划——重大疾病治疗药物制剂质量研究评价技术联合研究(编号 2020YFE0201700) |
|
| 摘要点击次数: 663 |
| 全文下载次数: 577 |
| 中文摘要: |
| 目的：探究盐酸特拉唑嗪片溶出度测定结果不满足标准限度要求的原因。方法：利用高分辨率显微CT技术对盐酸特拉唑嗪片的内部微观结构进行观察分析。结果：对二者的内部三维结构进行对比发现，溶出度测定结果不满足标准限度要求的样品与参比制剂相比具有更大的孔隙率。结论：推测由于样品孔隙率过大，导致样品在常规溶出杯500 mL介质中产生了堆积效应，在主成分溶解前被辅料覆盖聚集于溶出杯底部，导致溶出度测定结果不满足标准限度要求。 |
| 英文摘要: |
| Objective: To explore the reasons for the dissolution test results of terazosin hydrochloride tablets failed to meet the standard limit requirements. Methods: The internal microstructure of terazosin hydrochloride tablets was observed and analyzed by high-resolution micro-CT technology. Results: Comparing the internal three-dimensional structures of the two, it was found that the samples in which dissolution test results did not meet the requirements of the standard limit had larger porosity than that of the reference preparation. Conclusion: It is speculated that due to the excessive porosity of the sample, the sample has a stacking eff ect in the 500 mL medium of the conventional dissolution vessel. The sample is covered by the excipients and aggregated at the bottom of the dissolution vessel before the main component is dissolved, resulting in the dissolution test result not meeting the standard limit requirements. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |